Argus4 320


 

Add Product to Enquiry Basket:


CAMERA STANDARD FEATURES

The Argus®4 320 comes with the most advanced features available in any Thermal Imaging Camera. These include: These include:
  • Scene Colourisation – user selectable choice of colour palettes
  • Direct Temperature Measurement (DTM)
  • SceneSave™ Digital Image Capture – 100 image capacity
  • Tri-Mode Sensitivity
  • Customisable Start-up Screen
  • Ambient Temperature Measurement
  • Digital X2 Zoom
  • On screen time and date
CAMERA ORDER CODES

The Argus®4 320 has the following order codes:
  • P7150 – Supplied in soft carry case
  • P7150/N – Supplied in hard carry case
Customer configurable variants are available on request


CAMERA STANDARD ACCESSORIES

The Argus®4 320 comes with the following standard accessories:

• Handle
• Soft carry case (hard case optional)
• Side straps
• Remote control
• Two rechargeable battery packs
• Battery charger with mains plug (US, UK, Europe)
• Neck strap
• USB Connection Lead for PC/laptop
• User manual
• End-user software

WARRANTY


• 24-month warranty as standard (exclusions apply)
• Warranty can be extended for up to an additional three years at the time of purchase (exclusions apply)

CAMERA SPECIFICATION

Environmental Data
Thermal conditions - The camera has been designed to operate continuously between -10°C (14°F) and +80°C (176°F) or:
150°C (300 °F) for 15 minutes or 260 °C (500 °F) for 6 minutes

Sealing – IP67, will withstand short-term immersion in water

Impact - The camera will withstand a drop from a height of 2 metres (78 inches) onto concrete

Storage - It is recommended that for maximum effective operational life, the storage temperature is kept between –10°C and +40°C (14°F and 104°F).

Optical Data
Detector

Sensor type - Uncooled Microbolometer
Sensor material - Amorphous Silicon (ASi)
Resolution - 320 x 240 array
Pixel size - 25μ
Spectral response - 8 – 14 μm
MDTD - (Minimum Discernible Temp
Difference) <100mK
Dynamic range - -40°C to 800°C (-40°F to 1472°F) via 3 ranges with auto-switching
Refresh rate - 60Hz
Spot temperature range - 0°C to 800°C (32°F to 1472°F)
Ambient temperature range - -15°C to 150°C (5°F to 300°F)

Lens
Lens material - Germanium
Focal length - 8.6 mm
Focal distance - 1m to infinity, optimised at 4m (3 feet to infinity, optimised at 13 feet)
Horizontal aperture - f/1.0
Field of view - 50° horizontal, 37.5° vertical

Display
Display type – High grade, Industrial, colour TFT active matrix LCD
Display size - 90 mm (3.5 inches)
Pixel format – QVGA 320 x 240, (each pixel RGB format, total pixels 230, 400 pixels)
Video input – digital
Backlight – High brightness, white LED

Mechanical Data
Overall dimensions (H x W x D) - 130 mm x 185 mm x 185 mm, (5.1 x 7.2 x 7.2 inch) (nominal)
Camera weight – without battery, <1.2 kg (2.6 pounds), with battery, <1.5 kg (3.3 pounds)
Outer camera case and handle Radel®R-5100 and Santroprne®
Rear and front bumpers – Multiflex® or Santroprne®
Neck and side straps - Nomex®
Lens window – Germanium (2mm thick) with durable coating

Electrical Data
Power consumption - <3 W typical
Start-up time – 5 seconds typical
Batter type - Ni-MH Rechargeable Battery
Battery capacity - 2300 mAH
Battery life - 4 hours @ ambient temperature (22°C, 72°F)
Battery charge time - 2 hours nominal
Battery recharge cycles - 500 @ 80% capacity, 1000 recharges in total
Battery sealing – IP67
Charging temperature - 0°C to 40°C (32°F to 104°F) 65°C (150°F) can be tolerated
Charger input voltage - 100 to 240 VAC, 50/60Hz, 1 A max
Charger operating temperature - 0°C to 40°C (32°F to 104°F)

Video Outputs
Digital – MPEG4, RTSP video streaming @ 10Hz
Analogue – NTSC 525-line 60 Hz (EIA RS-170)

Compliance Data
RFI/EMC

Emissions - BS EN 61000-6-3:2007, FCC CFR-47 Subpart B Class B, AUS/NZ 4251.1

Immunity - BS EN 61000-6-2:2005

Safety - IEC 60950-1 and related national standards

Vibration/Shock - BS EN 60721-3-2 Class 2M3

RoHS – All parts of the system are compliant with EU directive 2002/95/EC