Product Range
Argus4 HR320 Specification Details
+ Click Image to Enlarge
CAMERA FEATURES
The Argus4 HR320 comes with the most advanced features available in any Thermal Imaging Camera. These include:
- High resolution, 384 x 288 pixel, Amorphous Silicon (ASi) Microbolometer Detector. Designed using advanced digital imaging technology for a sharper picture and provides superior performance.
- Enhanced Dynamic Scene Colourisation(EDSC) Colourises the thermal image to allow the fire-fighter to pinpoint the hottest areas within the fire scene. With the Argus4 HR320 the dynamic scene colourisation has been enhanced to give the user greater information.
- Direct Temperature Measurement (DTM)Displays the temperature of objects within a defined area of the thermal scene.
- SceneSaveTM Digital Image Capture
The Argus4 HR320 can capture and store up to 100 images. These can then be viewed or deleted using the remote control supplied. Using the software provided, the captured images can be downloaded to a suitable laptop/PC and exported in various formats. - Tri-Mode Sensitivity
The Argus4 HR320 now has an expanded third level of sensitivity for very high scene temperatures to enable clear imagery at all temperatures. This expanded temperature range means that temperatures in excess of 1000OC can be viewed. - Customisable Start-up Screen
Brigade logos or station names can be added to the start-up screen for asset tracking and/or personalisation of the camera. - Ambient Temperature Measurement
A sensor fitted to the front of the camera, which measures the ambient temperature of the local environment. The temperature is displayed on the viewing screen. - X4 Zoom
Allows the user to further zoom in on the scene, from a distance, for improved investigation and identification of hot spots and dangers. - Time and Date
The time and date is displayed at the top of the viewing screen. - Remote Control
The Argus4 HR320 is supplied with a remote control that allows the end user to adjust LCD settings, set the dynamic scene colorisation and set the time and date. Stored images can be reviewed and deleted.
The camera has a single on/off button with a delayed off operation to prevent accidental power-down during use.
The camera will display a start-up screen until a useable thermal image is produced.
The Argus4 HR320 is constructed from high quality RadelÒR-5100, which has been chosen for its strength, resistance to heat, water and impact.
Protection from shock is provided by a combination of rugged components, optimum mechanical design and protective bumpers.
The camera is sealed to allow short-term total immersion in water (IP67).
The camera is supplied with side straps and a removable handle, which provides flexible operation and transfer between users.
No end-user maintenance is required other than recharging of batteries and post-use external cleaning with a soft cloth.
The Argus4 HR320 offers the same simple-to-operate configuration of the standard Argus4.
It is a robust, self-contained camera, with fully automatic operation with no control or adjustment required in use.
CAMERA STANDARD ACCESSORIES
The Argus4 HR320 comes with the following standard accessories:
- Handle
- Soft carry case
- Side straps
- Remote Control
- Two rechargeable battery packs
- Battery charger with mains plug (US, UK, Europe)
- Neck strap
- USB Connection Lead for PC/laptop
- User manual
- End-user software
WARRANTY AND SUPPORT
- The camera is supplied with a 24-month warranty as standard.
- Warranty can be extended for up to an additional three years at the time of purchase.
e2v will attempt to repair any camera within 48 hours of receipt at one of their service centres worldwide.
OPTIONAL CAMERA ACCESSORIES
The ArgusTM4HR320 has a complementary range of accessories. These are:
Truck Storage Mount and Battery Charger
Provides secure storage with instant access for the camera and charging facilities for the battery pack.
Transmitter Battery Pack
Allows the transmission of the thermal image from the camera to other personnel outside the fire incident via a radio link.
Receiver Station and Kit
The Receiver Station is a PC based system that allows the viewing of the thermal image transmitted from the camera. The Receiver Station is available as complete solution (PC and receiving card and antenna) or as a kit (receiving card and antenna).
(Part Numbers P7030RRS and P7030RKT)
External Power and Video Adaptor
A module to replace the battery pack to allow live digital video to be viewed and the camera externally powered.
Hard Carry Case
An alternative to the soft carry case. Can be supplied with the camera using part number P7130/N or as an after-sale accessory.
(Part Number P7030HC)
Mounting Bracket
The Mounting Bracket provides a solution for the permanent fixing of the camera to any flat surface
CAMERA SPECIFICATION
Compliance Data
RFI/EMC Conducted Emissions - BS EN 61000-6-3:2001 Class BFCC CFR-47 Part 15
Radiated Emissions - BS EN 61000-6-3:2001 Class BFCC CFR-47 Part 15
Electrostatic Discharge - BS EN 61000-6-1:2001 Class B
Safety IEC 60950-1 and related national standards
Vibration/Shock BS EN 60721-3-2 Class 2M3.
Restriction of the use of Hazardous Substances in electrical and electronic equipment (RoHS) All parts of the system are compliant with EU directive 2002/95/EC
Environmental Data
Thermal conditions - The camera has been designed to operate for:
45 minutes at 80 °C (176 °F)
15 minutes at 150 °C (300 °F)
7 minutes at 260 °C (500 °F)·
Minimum operating temperature is–10 °C (14 °F)
Sealing - The camera is sealed to allow short-term immersion in water (IP67)
Impact - The camera has been designed to withstand a drop from a height of 2 metres (78 inches)
Vibration - The camera has been design to withstand transportation vibration defined by BS EN 60721-3-2 Class 2M3
Storage - The camera can be stored for extended periods. It is recommended that for maximum effective operational life, the storage temperature is kept between –10 °C and +40 °C (14 °F and 104 °F) and the camera is retained in its carry case when not in use.
Optical Data
Detector
Sensor type - Uncooled Microbolometer
Sensor material - Amorphous Silicon (ASi)
Resolution - 384 x 288
Spectral response - 8 – 14 mm
MDTD -(Minimum Discernable Temp Difference) < 0.1 °C
Dynamic range - -40 °C to 800 °C (-40 °F to 1480 °F) using 3 ranges with auto-switching between ranges.
Refresh rate - 120 Hz
Spot temperature range - -40 °C to 800 °C (-40 °F to 1480 °F)
Ambient temperature range - -15 °C to 150 °C (5 °F to 300 °F)
Lens
Lens material - Germanium
Focal length - 8.6 mm
Focal distance - 1 m to infinity, optimised at 4 m(3 feet to infinity, optimised at 13 feet)
Horizontal aperture - f/1.0
Field of view - 50° horizontal
Viewing
Displayed resolution - 320 x 240
Displayed refresh rate - 30 Hz
Display type - Transflective, active matrix colour TFT
Display size - 90 mm (3.5 inches)
Backlight - White LED
Mechanical Data
Overall dimensions(H x W x D) - 130 mm x 185 mm x 185 mm(5.1 x 7.2 x 7.2 inch) (nominal)
including handle(H x W x D) - 295 mm x 185 mm x 185 mm(11.5 x 7.2 x 7.2 inch) (nominal)
Weight without battery - < 1.2 kg (2.6 pounds)
with battery - < 1.5 kg (3.3 pounds)
with battery and handle - < 1.7 kg (3.7 pounds)
Materials
Outer camera case - RadelÒR-5100
Rear bumper - Multiflexâ
Front bumper - Multiflexâ
Neck strap - Nomexâ
Side straps - Nomexâ
Handle - RadelâR-5100 overmoulded in Santopreneâ
Electrical Data
Power supply Power consumption -3 W typical
Start-up time - 5 seconds typical
RECHARGEABLE BATTERY AND
CHARGER SPECIFICATION
Battery
Type - Ni-MH Rechargeable Battery
Capacity - 2300 mAH
Battery life - 4 hours @ ambient temperature (22 °C, 72 °F)
Charge time - 2 hours nominal
Recharge cycles - 500 @ 80% capacity
Length - 125 mm (4.8 inches) nominal
Width - 55 mm (2.2 inches) nominal
Height - 50 mm (2 inches) nominal
Net weight - 220 g (0.1 pounds) nominal
Charging temperature - 0 °C – 40 °C (32 °F – 104 °F)65 °C (150 °F) can be tolerated
Sealing - IP56
Charger
Power requirements - 100 – 240 VAC, 50/60 Hz, 1 A max
Length - 105 mm (4 inches) nominal
Width - 65 mm (2.5 inches) nominal
Height - 35 mm (1.4 inches) nominal
Net weight - 220 g (0.1 pounds) nominal
Operating temperature - 0 °C – 40 °C (32 °F – 104 °F)
Protection - Over-voltage and over-temperature protection built into the charger and battery.
Compliance - EMC Directive 89/336/EEC
Low Voltage Directive 73/23/EEC
BS EN60335 Part 1 and Part 2-29
RoHS - All parts of the system are compliant with EU directive 2002/95/EC
Sealing - IP20
Charging Shoe
Length - 150 mm (5.8 inches) nominal
Width - 70 mm (2.75 inches) nominal
Height - 50 mm (2 inches) nominal
Net weight - 200 g (0.1 pounds)
Operating temperature - 0 °C – 40 °C (32 °F – 104 °F)
Sealing - IP20
