Product Range

Argus4 Lite + DSC Option

Argus4 Lite + DSC Option
Argus4 Lite + DSC Option
Argus4 Lite + DSC Option
Argus4 Lite + DSC Option
Argus4 Lite + DSC Option


+ Click Image to Enlarge
Add Product to Enquiry Basket:


The Argus4 Lite + DSC Option, has all the features of the Argus 4 lite (P7030/LT) which include:

  • Tri-Mode Sensitivity for increased temperature range performance   
  • Colour battery level indicator and User replaceable external fittings.  
     
It also comes with Dynamic Scene Colorisation. (DSC) . Colorises the thermal image to allow the firefighter to pinpoint the hottest areas within the fire scene and is set up by the use of a supplied remote control.

Plus the following standard accessories: 
  • Soft carry bag 
  • Side straps 
  • One rechargeable battery
  • AC or DC battery charger 
  • Operating instructions
The Argus4 LITE P7030/LT/C  thermal imaging camera is a low cost, high quality solution to meet the needs of every firefighter. The Argus4 LITE uses the same highly successful Amorphous Silicon (ASi) Microbolometer Detector used in the Argus4 but allows the end-user to customise their camera to the features they require.
 
The Argus4 LITE is a simple to operate, robust, selfcontained camera, which has fully automatic operation; no control or adjustment, is required in use. The camera has been specifically designed to help firefighters to see through smoke, identify and rescue casualties and locate hot spots
or the seat and spread of the fire.
 
The Argus4 LITEis constructed from high quality Radel®R- 5100, which has been chosen for its strength, resistance to heat, water and impact. Protection from shock is provided
by a combination of rugged components, optimum mechanical design and protective bumpers. The camera is sealed to allow short-term total immersion in water (IP67).
 
No end-user maintenance is required other than recharging of batteries and post-use external cleaning with a soft cloth. Power for the Argus4 LITE is provided by an integral battery pack located on the top of the camera. The camera has a single on/off button with a delayed off operation to prevent accidental power-down during use. The camera will display a start-up screen until a usable thermal image is produced.

OPTIONAL FEATURES

The Argus4
LITE can be supplied with the same advanced features available on the standard Argus4. These features include:
  • Direct Temperature Measurement (DTM) Displays both the temperature of objects within a defined area of the thermal scene and also the ambient temperature of the environment using a sensor mounted on the front of the camera.
The above features can be supplied with the camera at time of purchase or added as an after sales upgrade.
 
WARRANTY
  • The camera is supplied with a 2-year warranty as standard.
  • Warranty can be extended for up to three years at time of purchase.
 
CONFIGURATION
 
Camera Order Code
Argus4 Lite + DSC Option P7030/LT/C
 
Optional Accessories Order Code
  • Station Battery Charger P7030BC and P7030CS
  • Truck Battery Charger P7030TBC
  • Truck Storage Mount P7030TSM
  • Truck Storage Mount and
  • Battery Charger P7030TSMBC
  • Rechargeable Battery Pack P7030R
  • Handle P7030HA
  • Neck Strap P7030NS
  • Retractable Lanyard P7030RL
  • Hard Carry Case P7030HC
 
CAMERA SPECIFICATION

Compliance Data
RFI/EMC Conducted
Emissions - BS EN 61000-6-3:2001 Class B FCC CFR-47 Part 15
Radiated Emissions - BS EN 61000-6-3:2001 Class B FCC CFR-47 Part 15
Electrostatic Discharge - BS EN 61000-6-1:2001 Class B
Safety IEC 60950-1 and related national standards Vibration/Shock BS EN 60721-3-2 Class 2M3.
 
Restriction of the use of Hazardous Substances in electrical and electronic equipment (RoHS)
All parts of the system are compliant with EU directive 2002/95/EC
 
Environmental Data
Thermal conditions - The camera has been designed to operate for:
45 minutes at 80 °C (176 °F)
15 minutes at 150 °C (300 °F)
7 minutes at 260 °C (500 °F)
Minimum operating temperature is –10 °C (14 °F)
 
Sealing - The camera is sealed to allow short-term immersion in water (IP67)
Impact - The camera has been designed to withstand a drop from a height of 2 metres (78 inches).
Vibration - The camera has been design to withstand transportation vibration defined by BS EN 60721-3-2 Class 2M3.
Storage - The camera can be stored for extended periods. It is recommended that for maximum effective operational life, the storage temperature is kept between –10 °C and +40 °C (14 °F and 104 °F) and the camera is retained in its carry case when not in use.

Optical Data
 
Detector
Sensor type - Uncooled Microbolometer
Sensor material - Amorphous Silicon (ASi)
Resolution - 160 x 120
Spectral response - 7 – 14 μm
MDTD - (Minimum Discernable Temp Difference) < 0.1 °C
Dynamic range - -40 °C to 800 °C (-40 °F to 1480 °F) using 3 ranges with auto-switching between ranges.
Refresh rate - 30 Hz
Spot temperature range - -40 °C to 800 °C (-40 °F to 1480 °F)
Ambient temperature range - -15 °C to 150 °C (5 °F to 300 °F)
 
Lens
Lens material - Germanium
Focal length - 6 mm
Focal distance - 1 m to infinity, optimised at 4 m (3 feet to infinity, optimised at 13 feet)
Horizontal aperture - f/1.0
Field of view - 50° horizontal
 
Viewing
Display type - Transflective, active matrix colour TFT
Display size - 90 mm (3.5 inches)
Backlight - White LED
 
Mechanical Data

Overall dimensions (H x W x D) - 130 mm x 185 mm x 185 mm (5.1 x 7.2 x 7.2 inch) (nominal)
Weight without battery - < 1.2 kg (2.6 pounds)
with battery - < 1.5 kg (3.3 pounds)
 
Materials
Outer camera case - Radel®R-5100
Rear bumper - Multiflex®
Front bumper - Multiflex®
Neck strap - Nomex®
Side straps - Nomex®
 
Electrical Data
 
Power Supply
Power consumption - 3 W typical
Start-up time - <5 seconds
 
Battery
Type - Ni-MH Rechargeable Battery Capacity - 2300 mAH
Battery life - 4 hours @ ambient temperature (22 °C, 72 °F)
Charge time - 2 hours nominal
Recharge cycles - 500 @ 80% capacity
Length - 125 mm (4.8 inches) nominal
Width - 55 mm (2.2 inches) nominal
Height - 50 mm (2 inches) nominal
Net weight - 220 g (0.1 pounds) nominal
Charging temperature - 0 °C – 40 °C (32 °F – 104 °F) 65 °C (150 °F) can be tolerated
Sealing - IP56
 
 

Related Documents


Related Pages

To view a PDF document you will need Adobe Acrobat Reader.
If you do not have this application on your computer you can download it for free from www.adobe.com.


Add Product to Enquiry Basket: